Dynacord L1300FD DSP Power Amplifier 2x650W

Live performance DSP amplifier. Fully integrated professional speaker processing with FIR Drive technology.Market leading acoustic performance and rock solid reliability.True 2 ohm stability.Intuitive system control software, makes setup and control easy.

Specifications

• Load Impedance : 2Ω 2.6Ω 4Ω 8Ω
• Maximum Output Power, SIngle Channel : 2Ω=1100W; 2.6Ω =950W; 4Ω=660W; 8Ω=350W
• Maximum Output Power, Dual Channel : 2Ω=1000W; 2.6Ω =850W; 4Ω=600W; 8Ω=320W
• Maximum Output Power, Bridged : 4Ω=2000W; 8Ω=1200W
• Maximum RMS Voltage Swing, THD = 1%, 1kHz : 55.3 V
• Voltage Gain ref.1kHz : 32.0dB
• IMD-SMPTE, 60 Hz, 7 kHz : < 0.1%
• DIM 30 : < 0.05% (3.15 kHz, 15 kHz)
• Maximum Input Level : +21 dBu
• Crosstalk : < -80dB (ref. 1 kHz, at 100 W/4 Ω)
• Frequency Response : 10 Hz to 21 kHz (±1 dB)
• Input Impedance, active balanced : 20kΩ
• Signal-to-Noise Ratio (A-weighted) : >104dB
• Output Noise , A-weighted : < -68 dBu
• Output Stage Topology : Class AB
• Power Requirement : 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
• Power Consumption : 550 W (⅛ Maximum Output Power @4Ω)
• Protection : Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
• Cooling : Front-to-rear, 3-stage-fans
• Safety Class : I
• Available Color : Black
• Height : 3.46" (88mm)
• Width : 19.02" (483mm)
• Depth : 18.2" (462.4mm)
• Weight Net : 28.44lbs (12.9kg)
• Signal Processing : FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
• Mains Fuse : 240 V/230 V: T10AH; 120 V/100 V: T20AH
• Operating Temperature Range : +5°C to +40°C (40°F to +105°F)
• Total Harmonic Distortion : < 0.05% (at 450 W/4 Ω MBW = 80 kHz, 1 kHz)