Dynacord L1800FD DSP Power Amplifier 2x950W

Dynacord L1800FD DSP Power Amplifier 2x950W
Dynacord L1800FD DSP Power Amplifier 2x950W Dynacord L1800FD DSP Power Amplifier 2x950W Dynacord L1800FD DSP Power Amplifier 2x950W
Dynacord L1300FD DSP Power Amplifier 2x650W

Dynacord L1300FD DSP Power Amplifier 2x650W

Dynacord L2800FD DSP Power Amplifier 2x1400W

Dynacord L2800FD DSP Power Amplifier 2x1400W

Dynacord L1800FD DSP Power Amplifier 2x950W
$749.00
Availability: Coming Soon
SKU
Dynacord:L1800FD-US

Live performance DSP amplifier. Fully integrated professional speaker processing with FIR Drive technology. Market leading acoustic performance and rock solid reliability. True 2 ohm stability. Intuitive system control software, makes setup and control easy.

Specifications

  • Load Impedance : 2Ω 2.6Ω 4Ω 8Ω
  • Maximum Output Power, SIngle Channel : 2Ω: 1600W; 2.6Ω: 1300W; 4Ω: 950W; 8Ω: 480W
  • Maximum Output Power, Dual Channel : 2Ω: 1400W; 2.6Ω: 1200W; 4Ω: 850W; 8Ω: 450W
  • Maximum Output Power, Bridged : 4Ω: 2800W; 8Ω: 1700W
  • Maximum RMS Voltage Swing, THD = 1%, 1kHz : 65.1V
  • Voltage Gain ref.1kHz : 32.0dB
  • IMD-SMPTE, 60 Hz, 7 kHz : <0.1%
  • DIM 30 : <0.05% (3.15 kHz, 15 kHz)
  • Maximum Input Level : +21dBu
  • Crosstalk : < -80dB (ref. 1 kHz, at 100 W/4 Ω)
  • Frequency Response : 10 Hz to 21 kHz (±1 dB)
  • Input Impedance, active balanced : 20kΩ
  • Signal-to-Noise Ratio (A-weighted) : >105dB
  • Output Noise , A-weighted : <-68dBu
  • Output Stage Topology : Class AB
  • Power Requirement : 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
  • Power Consumption : 700W (⅛ Maximum Output Power @4Ω)
  • Protection : Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
  • Cooling : Front-to-rear, 3-stage-fans
  • Safety Class : I
  • Available Color : Black
  • Height : 3.46" (88mm)
  • Width : 19.02" (483mm)
  • Depth : 18.2" (462.4mm)
  • Weight Net : 33.51lbs (15.2kg)
  • Signal Processing : FIR Filters, Audio Limiters; Output delay per channel; 31 band GEQ per channel; PEQ per channel; Load impedance
  • Mains Fuse : 240 V/230 V: T10AH; 120 V/100 V: T20AH
  • Operating Temperature Range : +5°C to +40°C (40°F to +105°F)
  • Total Harmonic Distortion : <0.05% (600 W/4 Ω MBW = 80 kHz, 1 kHz)
More Information
Brands Dynacord
Item Condition NEW
Write Your Own Review
You're reviewing:Dynacord L1800FD DSP Power Amplifier 2x950W
Your Rating
Who Viewed This Also Viewed
L.R. Baggs Voiceprint DI Acoustic Guitar Impulse Response Pedal
L.R. Baggs Voiceprint DI Acoustic Guitar Impulse Response Pedal
$399.99
Jim Dunlop Primetone Triangle Refill Bag 1.50mm (12 BG)
Jim Dunlop Primetone Triangle Refill Bag 1.50mm (12 BG)
$23.99
Jim Dunlop Nylon Jazz Pick (24bg)
Jim Dunlop Nylon Jazz Pick (24bg)
$11.99
Jim Dunlop Mic Stand Pickholder, 7"  (M12)
Jim Dunlop Mic Stand Pickholder, 7" (M12)
$6.99
Jim Dunlop Tortex Triangle Pick, 1.14mm (72bg)
Jim Dunlop Tortex Triangle Pick, 1.14mm (72bg)
$36.99
Jim Dunlop Tortex Small Tear Drop Pick, 0.50mm (36bg)
Jim Dunlop Tortex Small Tear Drop Pick, 0.50mm (36bg)
$15.99
Coffin Strap of Death Guitar Strap, Black
Coffin Strap of Death Guitar Strap, Black
$29.99