Electro Voice Power amplifier, 2 x 400 watts at 4 ohms, 2 RU, XLR/Phoenix type inputs, barrier strip outputs

$677.95

Electro Voice Power amplifier, 2 x 400 watts at 4 ohms, 2 RU, XLR/Phoenix type inputs, barrier strip outputs

Out of stock

SKU: ele:CPS2.4 Categories: , ,
Accepted Payments

Description

Designed for the contractor, the CPS 2.4 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.4 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.

Features

  • Up to 2 x 650 W into 2 ohms
  • Phoenix-type input and output connections
  • Remote power-on/off contact
  • Rear-mounted attenuators
  • Programmable time for custom power-on delay settings
  • Module slot for optional RCM-810 card, allowing IRIS-Net control and monitoring
  • Switchable 50 Hz high-pass filter
  • Three-stage front-to-rear fans
  • Class-AB design
  • Complete protection package

Specifications

  • Height: 3.47″ (88.1mm)
  • Amplifier Gain: 32dB
  • Analog Inputs: 2, electronically balanced, Phoenix-type
  • Audio Network: No
  • CAN Bus Interface: Optional (RCM-810 card)
  • Continuous Rated Power (1 kHz, THD 1%) 2Ω: 650Watts
  • Continuous Rated Power (1 kHz, THD 1%) 4Ω: 450Watts
  • Continuous Rated Power (1 kHz, THD 1%) 8Ω: 270Watts
  • Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω: 400Watts
  • Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω: 200Watts
  • Cooling: Front-to-Rear, 3-stage fans
  • Crossover Type: Optional Modules
  • DIM 30: 0.05%
  • Electronics Type: Amplifier
  • Frequency Response (-3 dB): 10 Hz – 40 kHz (±1 dB)
  • Impedance: 2/4/8Ω
  • Input Impedance (Balanced): 20kΩ
  • Input Sensitivity: 2.2 dBu (1.0V)
  • Intermodulation Distortion (SMPTE): 0.1%
  • Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz – 60 Hz (factory configured)
  • Maximum Bridged Output 4Ω: 1300Watts
  • Maximum Bridged Output 8Ω: 900Watts
  • Maximum Input Voltage: +21 dBu (8.69 Vrms)
  • Network Control (IRIS-Net): Optional (RCM-810 card)
  • Slew Rate: 25V/µs
  • Topology: Class-AB
  • Total Harmonic Distortion: 0.03%
  • Variable Load Drive (VLD): No
  • Weight Net: 27.78lbs (12.6kg)
  • Depth: 16.59″ (421.5mm)
  • Width: 19″ (482.6mm)

Additional information

Item Condition

Brands

Shopping Cart
Scroll to Top