EV Electro Voice CPS2.4 Contractor CPS Power Amp 800 Watt Amplifier

EV Electro Voice CPS2.4 Contractor Series CPS Power Amplifier 2x400 Watt Amp
EV Electro Voice CPS2.4 Contractor Series CPS Power Amplifier 2x400 Watt Amp
DBX 286S Mic Pre-Amp Processor 286-S Microphone PreAmp OPEN BOX SAVINGS!

DBX 286S Mic Pre-Amp Processor Microphone PreAmp OPEN BOX SAVINGS!

EV Electro-Voice ELX118 18

EV ELECTRO VOICE ELX118 18" Passive Subwoofer DEMO!

EV Electro Voice CPS2.4 Contractor Series CPS Power Amplifier 2x400 Watt Amp

It's In Stock & Ready to Ship!

$500.00
Availability: In stock
SKU
ele:CPS2.4-DEMO

The Electro-Voice CPS2.4 is from the Contractor Precision Series of professional amplifiers. The high efficient Class-H design reduces the power dissipation significantly and allows for more amplifier channels and output power in a given rack space.

The audio performance of the CPS2.4 is state-of-the art and fulfills the highest sound expectations in demanding applications from concert sound to theater. The CPS2.4 features the same complete protection package as all EV Precision Series amplifiers. Protection against: excessive HF, DC fault, high temperature, and Back-EMF as well as turn-on delay, peak current and inrush current limiters. In addition to the rated output power the CPS2.4provides up to 30% percent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping of the CPS2.4 will not exceed a THD of 1% up to an input signal of +21dBu. Detented level controls on the rear panel provide precise (1dB-detend) and repeatable settings.

Front panel LEDs indicate signal present, 0 dB, and limit. Female XLRs and Phoenix type connectors for inputs and barrier strips for outputs provide an easy rack wiring. The power on/off function of the CPS2.4 can be remote controlled via a 24V DC source. Optional x-over cards for biamp operation (e.g. a 2-way cinema system) can be retrofitted.

Features

  • 2 x 600W/2 Ohms
  • High Efficient Class-H Design
  • 2 U Rack Space
  • Detend Rear Level Controls
  • Complete Protection Package
  • Dynamic Limiter
  • Phoenix Type Inputs
  • Barrier Outputs
  • Retrofit Signal Processing Kits
  • Remote Power On/Off

Specifications

  • @2 Ohms/4 Ohms/8 Ohms
  • Maximum Midband Output Power (THD = 1%, 1 kHz, Dual Channel): 600W/400W/240W
  • Rated Output Power (THD = 0,1 %, 20 Hz - 20 kHz): ---/300W/150W
  • Maximum Bridged Output Power (THD = 1%, 1 kHz): ---/1240W/800W

More Specs

  • Maximum RMS Voltage Swing (THD = 1%, 1 kHz): 50V
  • Power Bandwidth (THD = 1%, 1 kHz, Half Power @ 4 Ohms): 10 Hz - 60 kHz
  • Voltage Gain ref. 1 kHz: 32.0 dB
  • Input Sensitivity (@ Rated Power, 8 Ohms, 1 kHz): +1.15 dBu (0.88 Vrms)
  • THD @ Rated Output Power (<0.1%, CPS2T@100V): < 0.05%
  • IDE-SMTP (60 Hz, 7 kHz): <0.02%
  • DIM 30 (3.15 kHz, 15 kHz): <0.01%
  • Maximum Input Level: +22 dBu (9.76 Vrms)
  • Crosstalk (ref. 1 kHz, Rated Output Power): <-80 dB
  • Frequency Response (+/- 1 dB, ref. 1 kHz): 15 Hz - 40 kHz
  • Input Impedance Active Balanced: 20 kOhms
  • Damping Factor @ 1 kHz: >300
  • Slew Rate: 35 V/us
  • Signal-to-Noise Ratio (A-Weighted): 103.5 dB
  • Power Requirements1:
  • 240V, 230V, 220V, 120V, or 100V; 50 - 60 Hz (Factory Configured)
  • Power Consumption: 600W
  • Power Dissipation (1/8 Max. Output Power @ 4 Ohms): 396W (1350 BTU/hr)
  • Protection: Audio Limiters, High Temperature, DC, HF, Back-EMF, Peak Current Limiters, Inrush Current Limiters, Turn-On Delay
  • Cooling: Front-to-Rear, 3-Stage Fans
  • Dimensions (W x H xD): 483mm x 88.1mm x 368.8mm (19ヤ x 3.5ヤ x 15.22ヤ)
  • Net Weight: 15.3 kg (30.8 lbs)
  • Shipping Weight: 16.8 kg (34.1 lbs)
More Information
Brands Electro Voice
Item Condition GENTLY USED
Write Your Own Review
You're reviewing:EV Electro Voice CPS2.4 Contractor CPS Power Amp 800 Watt Amplifier
Your Rating