The Plush “Plush Drive” pedal is a unique product, designed by Andy Fuchs. It uses a unique circuit topology which uses a combination of IC’s and selected FET’s, for lowest noise and the warmest tube like overdrive tones possible.
A unique bi-fet integrated circuit and matched discrete FETs are designed to emulate the smooth overload and musical second order distortion of a tube circuit quietly, musically, and reliably.
The Plush “Plush Drive” is a simple 4-knob overdrive pedal, which is easily dialed in for the widest range of overdrive tones.
The gain control is set to control the amount of distortion. It can go from a mild blues style distortion, to a high gain Dumble style medium gain overdrive when set at maximum gain.
The touch control is unique to this product. It sets the amount of touch sensitivity to your fingers and/or how hard you pluck the guitar.
The tone control goes from a dark (full counter clockwise) tone, to a bright chimey tone as the control is turned up.
Finally, the level control sets the final output level of the pedal. This control is used to set the solo level when the pedal is activated (LED on).
A Plush DC adaptor may be purchased from your local dealer or any standard Roland style (or similar) DC adaptor may be used. The output of the adaptor must be 9-Volts DC. Using this pedal with the incorrect adaptor may potentially damage the pedal, which will not be covered under warranty.
Dimensions: 5″ x 3.625″