ROCKETT Allan Holdsworth Boost Overdrive Guitar Effects Pedal

The Allan Holdsworth Signature OD/Boost was designed with Allan’s input to create a very versatile tool. This pedal gives you a very mild OD and a very “tweakable” boost section that allows for different EQ emphasis. By hitting the OD with the boost you can get some pretty scorching gain! Allan needed a pedal to combat backlines yet still achieve his signature sound and feel.

Drive

• Volume: The volume control will only affect the volume of the drive unless you cascade the boost into the drive.

 

• Gain: The gain control will only affect the gain of the drive side of the pedal unless you cascade the boost into the drive.

 

• Bass: The bass control will only affect the drive side of the pedal unless you cascade the boost into the drive.

 

• Treble: The treble control will only affect the drive side of the pedal unless you cascade the boost into the drive.

 

Boost

• Boost: The boost control affects only the volume of the boost side unless you cascade the boost into the overdrive.

 

• L Switch: The “L” switch position, when engaged, will emphasize the lows and will only affect the boost side of the pedal unless you cascade the boost into the drive.

 

• H Switch: The “H” switch position, when engaged, will emphasize the highs and will only affect the boost side of the pedal unless you cascade the boost into the drive.

 

• F Switch: The “F” switch position indicates full boost mode and will only affect the boost side of the pedal unless you cascade the boost into the drive.

 

• C Switch: The “C” switch position indicates clean boost mode and will only affect the boost side of the pedal unless you cascade the boost into the drive.

 

• T Switch: The “T” switch indicates treble boost mode and will only affect the boost side of the pedal unless you cascade the boost into the drive.

 

NOTE: Please pay attention to the lines on the faceplate. Each line indicates functions that are associated with the boost. These respective functions do not relate to the drive side unless the boost is cascaded into the drive. The pedal can be operated as two, discreetly independent units or it can be cascaded for more dramatic tones.

 

Specifications

• Dimensons: 4.75″ x 3″
• 9 volt Negative tip adaptor and a 5.5mm x 2.1mm jack.
• 9 volt Battery
• True Bypass Switching

 

Power Supply

All J. Rockett Audio Designs pedals operate off of the standard BOSS type 9 volt adapter or a single 9 volt battery. The power input is a 5.5 mm x 2.1 mm jack with the positive voltage on the outer sleeve. Using an external power supply will automatically disconnect the battery. Disconnect the input jack to preserve battery life when not in use or when not used with an appropriate, external power supply.