Tech 21 SansAmp RBI 1U Rackmount Bass Pre-Amp Open Box Mint

The 1U rackmount SansAmp RBI is a pumped-up, expanded version of our popular SansAmp Bass Driver DI pedal. In addition to Drive, Presence, and active Bass and Treble controls, the SansAmp RBI has a dedicated Mid control and an XLR Output Level control for optimum performance with PA systems. It also features an Effect Loop with a Mix 50/50 switch (for parallel or series operation), an XLR output with selectable levels, and a buffered direct XLR output to provide a dry signal. Include access to the most coveted classic and modern bass tones, with unlimited freedom to create your own, and the SansAmp RBI is practically mandatory for any bass player.

Dimensions: 19"w x 1.5"h x 5.25"d (6.25"d overall)
Weight: 5 lbs.

Armed with a truckload of bass amp rigs in a single rackspace, you can travel as heavy or light as you like:

    Show up at any studio with just a SansAmp RBI and plug directly into the board
    for premium tones without miking.
    Gig with the SansAmp RBI directly through the house PA without using a separate amp.
    Go to a gig with a SansAmp RBI, a Bass Power Engine 60 (see optional accessories below)
    and run directly through the house P.A. system.
    Take a more "traditional" set-up to a gig with a SansAmp RBI, power amp and
    speaker cabinet, and run directly through the house P.A. system.

RBI ADITIONAL FEATURES
Drive adjusts the overall amount of gain and overdrive.
Presence brings out the upper harmonic content and attack.
Blend allows you to mix the direct instrument signal with SansAmp Tube Amplifier Emulation circuitry.
Active Bass and Treble controls cut or boost ±12dB.
Dedicated Mid control, cut or boost ±12dB.
Individual Level control for the XLR out to optimize your amp's output relative to the P.A. system.
Effects Loop.
Mix 50/50 switch to configure the Effects Loop in series or parallel.
1/4" rear input and XLR output with selectable levels.
Buffered uneffected XLR output to run a dry signal to a separate channel.
Footswitch input to engage unit.
Footswitch output to chain and toggle between another SansAmp RBI.  (If you prefer programmability, you may want to consider our own "not-just-for-guitar" SansAmp PSA. There are 10 presets devoted to bass and 49 user-definable locations for storing custom settings.)