The V11 is a turning point for the praised Vintage series with absolutely new microphone design which follows the same vintage traditions and qualities as all JZ Microphones products and it is not a version or replica of classic and legendary microphones like U47, U67 or C12. The number 11 stands for a 2011 as reference year when a new classic microphone has been created. Vintage 11 is dedicated for everyone who loves recording in highest quality possible and wants something better than all known studio standards.
Vintage 11
- Transducer Type: electrostatic
- Operating Principal: Pressure Gradient
- Diaphragms Active Diameter: 27 mm
- Frequency Range: 20 Hz to 20 kHz
- Polar Pattern: cardioid
- Output Impedance: 50 ohms
- Rated Load Impedance: 1000 ohms
- Suggested Load Impedance: >500 ohms
- Sensitivity at 1000 Hz into 1000 ohms load: 22 mV/Pa
- S/N Ratio CCIR 468-3 weighted: 76.5 dB
- S/N Ratio DIN/IEC 651 A-weighted: 87.5 dB-A
- Equivalent Noise Level DIN/IEC A-weighted: 6.5 dB-A
- Maximum SPL for 0.5% THD at 1000 ohm load: 134 dB
- Dynamic Range of the Microphone Preamplifier: 128 dB
- Phantom Powering Voltage on pins 2 & 3 of XLR: +48 V (+/-4 V)
- Current Consumption:
- Output Connector: 3-pin XLR male, gold plated contacts
- Signal Polarity: Positive toward pressure on a diaphragm produces positive polarity voltage on XLR pin #2 relatively to pin #3
